Roland Studio Capture USB Audio Interface
The STUDIO-CAPTURE by Roland packs twelve impressively pristine VS PREAMPs and exceptional 24-bit/192kHz AD/DA conversion into a rackmountable USB 2.0 interface. If you demand high channel count and superb audio quality from a multichannel interface built with on-the-go convenience in mind, then the STUDIO-CAPTURE is the perfect companion to your laptop Mac or PC. It has 40-bit DSP-driven cue mixing onboard that lets you set up four independent stereo mixes quickly and easily. And thanks to Roland's extreme low-latency driver, you can use the STUDIO-CAPTURE efficiently with almost any Mac of PC DAW.
High-quality interface in a compact unit
Roland's STUDIO-CAPTURE packs twelve digitally-controller premium VS preamps. These are the same preamps found in the V-Studio 700 and M-400 digital mixers. With a 24-bit/192kHz sample rate you can rest assured your audio will be clean and clear. The Roland STUDIO-CAPTURE is the perfect interface for your home studio or on the go. Each channel offers independent phantom power, a low-cut filter, phase invert, and digital compression, accessible via the included software control panel.
Get the perfect input levels with the push of a button
An Auto Input Level Adjustment lets you instantly set the ideal input level of each of the STUDIO-CAPTURE's analog inputs with just the push of a button. Just push the front-panel button and play your instrument for automatic level setting. Useful for beginners and pros alike, this is a fail safe to capturing great audio every time.
Custom monitor mixes straight from the STUDIO-CAPTURE
Create individual monitor mixes, with effects, all within the Roland STUDIO-CAPTURE. With four independent zero-latency monitor mixers, you'll be able to create the mixes your band needs and wants. Powered by the STUDIO-CAPTURE's internal DSP, each mix can be routed out various outputs. You can even save mixes for later use. A built-in reverb processor lets you add reverb to any or every mix to help your performers.
12 Premiums Mic Preamps
Among its many standout features, STUDIO-CAPTURE offers 12 digitally controlled mic preamps (VS PREAMPS), built with premium-grade components for exceptional low-noise performance, high headroom, and transparent sound quality. 12 XLR/TRS combo inputs are provided for the preamps, with four inputs conveniently located on the front panel for quick and easy access. Available on each channel is independent phantom power, a low-cut filter, phase invert, and digital compression, accessible via the included software control panel.
Features:
- High-performance USB 2.0 audio interface for studio and mobile production
- 16 audio inputs and 10 audio outputs, including 12 premium mic preamps (VS PREAMP)
- VS STREAMING delivers ultra-stable, low-latency driver performance for Windows and Mac
- AUTO-SENS intelligently sets optimal input levels for all preamps
- Individual input/output meters and input channel buttons
- Four independent, software-controlled monitor mixes
- XLR monitor out, direct monitor, and dual headphone outputs with independent front-panel level knobs
- Coaxial digital I/O; MIDI I/O with FPT
- Expand your I/O by using two STUDIO-CAPTUREs together, both controlled with a single driver
- 2U rackmount ears included
Number of Audio Record/Playback ChannelsSampling Rate: 96 kHz, 48 kHz, 44.1 kHz
Record: 16 channels
Playback: 10 channels
Sampling Rate: 192 kHz
Record: 8 channels
Playback: 4 channelsSignal ProcessingPC interface: 24 bits
AD/DA Conversion: 24 bits
Sampling RateAD/DA Conversion: 192 kHz, 96 kHz, 48 kHz, 44.1 kHz
DIGITAL (IN/OUT): 96 kHz, 48 kHz, 44.1 kHz
Nominal Input Level (variable)Input 1–12 jacks (XLR type): -60 to -2 dBu
Input 1–12 jacks (1/4-inch TRS phone type): -54 to +4 dBu
Input 13–16 jacks (1/4-inch TRS phone type): -20, -10, +4 dBu
Nominal Output LevelOUTPUT 1–8 jacks: +4 dBu (balanced)
Headroom18 dB
Output ImpedanceOUTPUT 1–2 jacks (XLR type): 600 ohms (balanced)
OUTPUT 1–8 jacks (1/4-inch TRS phone type): 2k ohms (balanced)
PHONES: 47 ohms
Frequency Response192.0 kHz: 20 Hz to 60 kHz (+0/-2 dB), 20 Hz to 90 kHz (+0/-8 dB)
96.0 kHz: 20 Hz to 40 kHz (+0/-2 dB)
48.0 kHz: 20 Hz to 22 kHz (+0/-2 dB)
44.1 kHz: 20 Hz to 20 kHz (+0/-2 dB)
Residual Noise LevelINPUT 1–2 -> OUTPUT 1–2: -90 dBu typ. (SENS = min., Input terminated with 600 ohms, IHF-A)
* Input channel fader = Unity
Dynamic RangeAD block INPUT 1–2: 105 dB typ. (SENS = min.)
DA block OUTPUT 1–2: 114 dB typ.
DisplayGraphic LCD 128 x 64 dots
ConnectorsINPUT 1–12 jacks *1: XLR type (balanced, phantom power *2: DC +48 V (unloaded maximum), 10 mA (maximum load))
INPUT 1–16 jacks: 1/4-inch TRS phone type (balanced)
PHONES jack: Stereo 1/4-inch phone type
OUTPUT 1–8 jacks: 1/4-inch TRS phone type (balanced)
COAXIAL IN jack: RCA phono type (conforms to IEC60958)
COAXIAL OUT jack: RCA phono type (conforms to IEC60958)
MIDI (IN, OUT) connectors
USB port: USB Type B
DC IN jack
*1 INPUT 1–2 jacks support high impedance
*2 Provided on all XLR-type input jacks. Current value is per channel. Total must not exceed 50 mA.
InterfaceHi-Speed USB
Power SupplyAC adaptor
Current Draw1.6 A
AccessoriesOwner's Manual
Block Diagram leaflet
AC adaptor
STUDIO-CAPTURE Driver CD-ROM
Rack mount angle x 2
USB cable
License agreement
SIZE AND WEIGHTWidth284 mm
11-3/16 inchesDepth162 mm
6-7/16 inchesHeight89 mm
3-9/16 inchesWeight1.9 kg
4 lbs. 4 oz.
|
