 |
 |
 |
 |
Eventide Reverb 2016While the algorithms are identical to the originals, the hardware implementation is state-of-the-art, with features that include a high performance 24 bit DSP, 24 bit analog audio I/O, digital I/O and MIDI interface.
The Reverb 2016 is built to reverb: it's not a multi-effects box. It was designed from the perspective that reverb is used nearly always and warrants a dedicated box with an optimal user interface. The Reverb 2016 UI is extremely easy-to-use featuring dedicated controls for each of the effect's parameters. The controls and display are intuitive. The UI is optimized for the studio and for live performance. Up to 99 user presets can be stored.
While recreating the original reverbs is the Reverb 2016's raison d'etre, it also features brand new, enhanced versions of the originals. These "New" reverbs are not a breakthrough: they have the same basic structure of the originals but with more complex early reflections, higher density, and finer control of the parameters. The "New" reverbs represent the natural evolution of the development work that maxed out the array processing power of the SP2016.
Features:
- Re-creates 3 original SP2016 effects: Stereo Room, Room Reverb, and High Density Plate
- Enhanced version of each effect for 6 total effects
- Interface is intuitive and optimized for studio and live applications
- Stores up to 99 user-defined presets
- Input kill switch
- Relay bypass switch
- >98dB dynamic range
- 24-bit conversion
- MIDI I/O
- Pro levels (+4dB nominal) and connections (2 XLR and 2 - 1/4")
- Balanced/unbalanced input selection via rear panel switch
- Universal internal power supply works anywhere
Digital Input/Output
|
Digital Input
|
Digital S/PDIF Input
Sample Rate: 44.1kHz - 48kHz (downsampled to 40kHz)
Connector: Coaxial, RCA type
Digital Input is selected via front panel switch.
|
Digital Output
|
Digital S/PDIF output
Sample Rate: 44.1kHz or 48kHz with ext clock
Connector: Coaxial, RCA type
Digital output is always active at 44.1 kHz when not using digital input
|
Audio Input
|
Connectors
|
1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
|
Impedance
|
+4dB/Bal switch position: 100kOhm
-10dB/Unbal switch position: 50K Ohms
|
Levels
|
+4dB/Bal switch position:
2dBu min for full scale
+20dBu max
|
-10dB/Unbal switch position:
-14dBu min for full scale
+8dBu max
|
|
Audio Output
|
Connectors
|
1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
|
Impedance
|
125 Ohms, each side, balanced
|
Levels
|
+18dBm max, full scale, balanced/unbalanced
|
General Audio
|
Frequency Response
|
Dry 20Hz-20kHz, +/-1dB
Wet 20Hz-16kHz, +-1dB
|
Dynamic Range
|
>90dB
20 Hz - 20 kHz, Non A-weighted
|
Sample Rate
|
40.0 kHz
|
Conversion
|
24 Bits A/D, 24 Bits D/A
|
Environment
|
Operating temperature: 32° to 104°F (0° to 40°C)
Storage: –20° to 170°F (-30 to 75°C)
Relative humidity: 95% non-condensing
|
Throughput delay
|
Less than 2 ms.
|
THD
|
<=0.05%, 20Hz-20kHz
|
Crosstalk
|
<=45db below full scale
|
Physical
|
Dimensions
|
Width 19"
Depth 6"
Height 1.75"
|
Weight
|
9.5 pounds
|
|
|
 |
 |
 |
 |

|