Home > All Brands > Alesis > Alesis Recording >

Alesis Synthesizer 4MB memory
Alesis Synthesizer 4MB memory

Alesis Synthesizer 4MB memory

High speed PCMCIA Flash 4mb memory card for storing samples, patches and mixes. Please note this WILL NOT work if you just want to store your current user banks, you need to purchase the Alesis Synthesizer 512k memory for this purpose.
List Price: $79.00
Our Price: $75.00
Savings: $4.00
Found a Better Price? Let Us Know.

Availability: IN STOCK
Product Code: SKU16529


Alesis Synthesizer 4MB memory

PC Card Type I Linear Flash is fully FTL and FFS compatible and features high performance. With no moving parts, a Linear Flash PCMCIA Memory Card is rugged and operates reliably in conditions normally hostile to data. Unlike ATA Flash, PCMCIA Linear Flash PC Cards support true random access so reads are extremely fast. In addition to data storage and retrieval, Linear Flash PC Cards can also execute programs directly from the card on systems featuring XIP (eXecute In Place) capabilities.

Compatible with all Alesis QuadraSynth and QS-series synthesizers capable of storing samples, including the Alesis QuadraSynth, QuadraSynth Plus Piano, QS6, QS6.1, QS7, QS7.1, QS8, QS8.1 and QSR models. Normally used with the Alesis SoundBridge software, to store up to 8MB of custom samples and programs.

  • PC Card Type I form factor
  • Extremely rugged and reliable
  • Single 5-Volt read, write, and erase
  • Byte-wide (8bit) or word-wide (16bit) operation
  • 64K word (128kB) symmetrical Block Architecture
  • Very low power consumption with automatic power management
  • Mechanical Write protect switch prevents overwriting valuable data
  • Embedded programming algorithms at device level automatically writes and verifies data
  • Erase Suspend/Resume feature allows users to suspend an erase operation and read data from any other sector on the card
  • Device level hardware block protection disables any combination of blocks (4 sectors) from write/erase operation
  • Applications for PC, PDA, PCA, Industrial Control, Embedded System, Instrumentation, Communication, etc.
  • Supports for XIP (Execution-In-Place) eliminates the need for redundant DRAM
  • No battery required for data retention or backup
  • Industry standard PCMCIA 2.x compliant
Warranty Information
  • 1 Year Limited Warranty
Flash Specifications Series D
  • Compatibility: AMD Series D
  • CIS in EPROM: Standard
  • Flash Type: 29F017D
Flash Specifications Series C
  • Compatibility: AMD Series C
  • CIS in EPROM: Standard
  • Flash Type: 29F040B
Physical Dimensions
  • Type I card: 85.6 x 54 x 3.3mm (LWH)
  • Weight: 29g (approx.)
  • Read Access time: 150ns (max)
  • Random Write Access: 7 sec (typical)
  • 100,000 write/erase cycles per card (min)
Electrical Characteristics
  • Operational Voltage Read: 5 Volts 5%
Power Consumption Series D Typical
  • Read access: 60 mA (max)
  • Write (program)/Erase: 150 mA (max)
  • Standby mode: 80 A (230 A max.)
Power Consumption Series C Typical
  • Read access: 45 mA (max)
  • Write (program)/Erase: 65 mA (max)
  • Standby mode: 0.07 to 2.5 mA (grows with capacity 10MB = 2.5 mA max.)
Operating Environment
  • Temperature Operating: 0 to 60 C
  • Temperature Storage: -30 to 80 C
  • Temperature Operating Industrial (Special Order): -40 to 85 C
  • Temperature Storage Industrial (Special Order): -40 to 85 C
  • Relative Humidity: 95% (max.) non-condensing
The advertised memory capacity of this device represents unformatted capacity. Please note that once formatted and due to variations in addressing limitations, the functional storage space may be lower than the advertised capacity.

Write a review »