 |
 |
 |
|
Yamaha MG10XU 10 Channel MixerThe MG10X from Yamaha is a compact 10-input mixer with built-in effects for small performances, lectures, recordings and similar applications. The mixer features four mic/line combo inputs with D-PRE mic preamps as well as four 1/4" line inputs with stereo level controls.
Each of the four mic/line inputs is equipped with a 2-band EQ and a high pass filter at 80Hz. The D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. They also each feature 26dB attenuation switches for recording loud sound sources such as guitar amplifiers.
The MG10X mixer has stereo XLR outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring, as well as TRS 1/4" stereo outs for sending to powered speakers, amplifiers or devices such as digital recorders.
The mixer's built-in effects can be engaged on the two mic/line combo inputs and they feature reverb and delay. Providing three reverb and three delay settings plus a dedicated FX return level control, these effects can be used to help vocals and instruments sit better in your mix.
Features:
- D-PRE mic preamps deliver clean, transparent, and natural sound
- 2-band EQ on all mono channels for sound-shaping
- SPX effect processors provide you with a selection of reverbs and delays
- Pad switch on mono inputs for managing loud sources
- Metal chassis for durability
|
Mixing capability
|
On-board processors
|
SPX algorithm: 24 programs
|
|
|
I/O
|
Phantom power
|
+48 V
|
|
|
Digital I/O
|
USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit
|
|
|
Input Channels
|
Mono[MIC/LINE]
|
4
|
|
|
Stereo[LINE]
|
3
|
|
|
Output Channels
|
STEREO OUT
|
2
|
|
|
MONITOR OUT
|
1
|
|
|
PHONES
|
1
|
|
|
AUX SEND
|
1
|
|
|
Bus
|
Stereo: 1, AUX[FX]: 1
|
|
|
Input Channel Function
|
PAD
|
26 dB (Mono)
|
|
|
HPF
|
80 Hz, 12 dB/oct (Mono)
|
|
|
COMP
|
1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
|
-
|
|
EQ HIGH
|
Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
|
|
|
EQ MID
|
Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
|
-
|
|
EQ LOW
|
Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
|
|
|
PEAK LED
|
LED turns on when post EQ signal reaches 3 dB below clipping
|
|
|
Level Meter
|
2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
|
|
|
General specifications
|
MG10XU
|
|
|
Total harmonic distortion
|
0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min
|
|
|
Frequency response
|
+0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
|
|
|
Hum & noise level
|
Equivalent input noise
|
-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
|
|
|
Residual output noise
|
-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
|
|
|
Crosstalk
|
-83 dB
|
|
|
Power requirements
|
PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha
|
|
|
Power consumption
|
22.9 W
|
|
|
Dimensions
|
W
|
244 mm (9.6")
|
|
|
H
|
71 mm (2.8")
|
|
|
D
|
294 mm (11.6")
|
|
|
Net weight
|
2.1 kg (4.63 lbs.)
|
|
|
Accessories
|
Included Accessory: AC Adaptor, Owner’s Manual, Cubase AI Download Information, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A, Foot Switch FC5
|
|
|
Others
|
Operating Temperature: 0 to +40˚C
|
|
|
|
|
 |
|
 |
|
