The PreSonus FireStudio is a complete 26x26
24-bit/96k professional recording system combining eight Class A
PreSonus microphone preamplifiers, up to sixteen channels of optical
ADAT input / output, S/PDIF and MIDI input / output, along with the
Control Console - a 36x36x18 zero latency mixer/router. The FireStudio
also comes with award-winning recording and production software,
virtual instruments, plug-ins, drum loops and samples to get you
started making music immediately.
PreSonus Preamplifiers
The FireStudio starts with eight on-board
custom-designed Class A microphone preamplifiers. Many other companies
offering recording interfaces add the cheapest possible microphone
preamplifier as an afterthought to the interface. PreSonus knows that
every major component in the signal path from the audio source to the
hard drive are extremely important and the preamplifier is a key
component. The job of a microphone preamplifier is to boost microphone
level signals to line level so that the signal can be converted from
analog to digital. This mic to line boost is generally an
preamplification of over 400 times the voltage of the original mic
level signal. This preamplification stage is one of the most important
stages that the signal will go through before converted to digital, and
is why a high performance preamplifier is important to achieving great
results. A cheap "off the shelf op-amp" type mic preamp that is found
in most interfaces translates into thin, noisy and harsh results. A
PreSonus preamplifier which operates in Class A mode and at higher
voltage/current ratings than off the shelf op-amps, is designed for
high headroom, low noise, wide dynamic range and wide frequency range,
and most importantly, musicality and transparency - smooth highs, solid
deep lows, and everything in between.
Ins and Outs
The FireStudio is loaded with I/O for an
extremely flexible and expandable recording system. The FireStudio
starts with eight Class A customer designed PreSonus microphone
preamplifiers. You can add additional preamplifiers or analog inputs
via the dual optical light pipe ports on the rear panel. You add up to
two DigiMax FS, for a total of twenty-four microphone preamplifiers all
in only three rack spaces! Additionally word/clock I/O for ultra tight
synchronization, MIDI I/O and SPDIF I/O are on the FireStudio for
further expandability.
JetPLL
The sycronization of the FireStudio is handled
by patented JetPLLTM jitter reduction technology. JetPLLTM incorporates
noise shaping to virtually remove all audio band jitter. JetPLLTM
ensures the highest converter performance possible, resulting in better
stereo separation and clearer more transparent audio. JetPLLTM delivers
ultra-fast locking to any digital format, through a wide range of
frequencies and is extremely robust, and tolerant of wide variations in
clock frequencies. JetPLLTM ensures near perfect clock performance when
networking audio devices thus creating the most stable and robust
synchronization to the computer and all devices synchronization with
the FireStudio.
Control Console - Zero Latency DSP Mixing/Routing
The FIRESTUDIO also includes the Control
Console - a 36x36x18 DSP mixer/router for flexible mixing and direct
routing any input to any output including the headphone output, with
zero latency. The Control Console software application lives between
your FireStudio interface and your DAW software enabling the mixing and
routing of input streams coming into your FireStudio interface and
playback stream coming from your DAW software. The Control Console is
capable of creating up to nine stereo mixes and then routing to the
outputs of your FireStudio for headphone mixes and various aux sends.
This way everyone in the band and the recording engineer can have a
custom mix.
Optional Monitor Station Remote (MSR)
The optional MSR (monitor station remote) for
the FireStudio is a complete surround/stereo speaker manager, input
switcher and communication system delivering a more efficient and
flexible work flow. The MSR connects to the FireStudio via standard Cat
5 Ethernet cable to keep your work space as clean as possible. There
are also two headphone outputs on the FireStudio for even further
flexibility and convenience.
ProPak Complete Software Suite
The PreSonus FireStudio also comes with the new
ProPak Complete Software Suite, which includes more than 20 real time
plug-ins, a number of virtual instruments and over 2 GB of drum loops
and samples including: Steinberg - Cubase LE; Propellerheads Reason
Adapted PreSonus Edition; IK Multimedia - Amplitube LE; FXpansion - BFD
lite; Drumagog LE; Sonoma Wire Works-Riffworks Jr.; Wave Arts –
TrackPlug LE, MasterVerb LE and more!
Features
- High-speed FireWire (IEEE 1394) audio interface
- 24-bit resolution, up to 96K sampling rate
- 26 simultaneous inputs and outputs
- 8 Class A microphone preamps w/ trim control
- 8 analog line Inputs, 2 Instrument Inputs
- 16 channels of optical ADAT I/O (8 ch. via 96k dual SMUX)
- S/PDIF I/O, MIDI I/O
- JetPLL™ – jitter elimination technology
- Zero latency DSP full-matrix mixer/router
- PreSonus ProPak Complete Audio Software Suite with Cubase LE, Reason Adapted, Amplitube LE, BFD Lite, Drumagog LE and more
System Requirements
PC
- OS: Microsoft Windows XP SP1
- Computer: Windows compatible computer with FireWire port.
- CPU/Clock: Pentium, Celeron with 1.6Ghz or higher
- Memory(RAM): 512 MB (1 GB recommended)
Mac
- OS: MacOS X 10.4.x or later
- Computer: Apple Macintosh series with on-board FireWire port.
- CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
- Memory(RAM): 512 MB (1 GB recommended)