The Moog MP-201 Multi-Pedal controller puts signal and MIDI control at
your feet! This rugged unit includes four footswitches and an
"accellerator-pedal-style" controller pedal that allows an incredible
range of parameter and signal control. The MP-201 features four analog
control outputs, and USB MIDI connectivity. You can program outputs
individually for command over analog control voltages, LFO waveforms,
and gate voltages. You also get several modes of operation from the
Moog-201 Multi-Pedal to bring the most out of your synth!
Quick Feature List:
- Programmable and flexible
- Five modes of operation
- Output
Programmable and flexible
The Multi-Pedal is a programmable four channel CV/MIDI foot pedal
controller. It has four analog control outputs, MIDI I/O, and USB
connectivity (MIDI over USB). It can transmit controller information on
up to 4 MIDI channels and CV outputs simultaneously. Each CV output can
be programmed individually. Signals can be foot pedal controlled analog
control voltages with +/-5V limits, LFO waveforms or GATE voltages
(0V=Off,+5V=ON). In addition, each channel can output MIDI CC's over
specified MIDI channels simultaneously with the analog CV outputs.
Five modes of operation
The MP-201 Multi-Pedal gives you five modes of operation: Single
Channel Mode, Quad Channel Mode, Preset Mode, Edit Mode, and Utilities
Mode. Single Channel Mode uses the footswitches to select programs,
channels, turn on/off channels, select tap tempo function, enter tap
tempo. Quad Channel Mode turns channels 1-4 on/off with footswitches
1-4 and uses the footpedal as an expression pedal for channels 1 to 4
simultaneously. Preset Mode defines the user programmable presets. A
collection of 4 programmed channels is a preset and there are 100
editable presets. Edit Mode programs the preset mode. Utilities Mode
accesses the utilities menu for non-preset related functions, such as
SysEx dump, firmware upgrades, restoration of factory settings, and
calibration.
Output
You get a variety of output signal options with the MP-201, allowing
you to control the LFO of user programmed rate, amount, and waveform
(triangle, square, sawtooth, ramp and sample and hold), as well as a
random noise CV. The footpedal voltage control can be programmed for
user-selected heel and toe voltages. You also get preset voltage
levels, and LFO signals are scalable and can be synced to MIDI clock,
tap tempo, each other, or free-running.
Full Features:
- Five modes of operation
- Optical foot controller
- Four footswitches (momentary)
- Four LEDs, one for each footswitch.16x2 character LCD (gray background, transflective, white LED backlight)
- Rotary Encoder with push switch (VALUE, CURSOR)
- Two momentary switches near LCD / Encoder (EDIT, STORE)
- USB Port (MIDI over USB)
- One MIDI In (DIN connector)
- One MIDI Out (DIN connectors)
- Four CV (Control Voltage) Out 1/4" connectors (selectable between -5V to 5V or 0V to 5V)
- Power in (wall mount power supply included)
