Mission Engineering 5-CV Dual Voltage Controller Pedal
The Mission 5-CV is a dual output +5V control voltage pedal for use with synthesizers, keyboards, and effects devices.
Many synthesizers, keyboards, multi-effects units and effects pedals can accept a CV input for controlling variable parameters, filters etc. The 5-CV provides two regulated +5VDC control voltages that can be varied by moving the pedal. Out 1 provides +5V at toe down and Out 2 provides +5V at heel down so that you can choose the direction of the sweep, or connect two devices simultaneously in different directions
This pedal is perfect for devices that have a CV input but will not work with a passive expression pedal. No external interfaces are required as the control voltage is generated by the pedal, just connect one or both outputs to the CV inputs on your synth or effects units with a TRS cable.*
*The 5-CV requires an external 9vDC center pin negative power supply, not supplied.
- Dimensions: L9.9″ x W3.9″ x H3.0″ (L and W at widest points. H at toe down including feet.)
- Weight: 3.15 lbs
- Exp output 1: 1/4″, 25K Linear, TRS tip to wiper
- Exp output 2: 1/4″, 25K Linear, TRS tip to wiper
- Box Contents: 1x EP-25K, 1x Hex Key