MOTU's HD192 Core sets new standards for features and value as a two
rack-space 12-channel high definition audio interface for Mac and
Windows. The HD192 provides high-quality audio recording and playback
on 12 balanced XLR analog inputs and outputs at any standard sample
rate up to 192 kHz, with expansion up to 48 channels of 192 kHz! And
the HD192 is full of advanced features, like AES/EBU I/O with sample
rate conversion both in and out. Ideal for surround applications, the
HD192 can support two simultaneous 5.1 mixes.
Inputs and Outputs
All 12 XLR inputs and outputs on the HD192 rear panel support operation
at 44.1, 48, 88.2, 96, 176.4 and 192kHz. Latest-generation converters
and state-of-the art design provide exceptional audio quality. The
measured dynamic range for the 12 analog inputs is just over 120 dB.
AES/EBU digital I/O is also provided at samples rates up to 96kHz with
independent real-time sample rate conversion on the digital input and
output. A separate "AES word in" BNC connector allows users to clock
the AES/EBU section independently from the rest of the system. System
word clock input/output is also provided on BNC connectors.
PCI-424 Card
The HD192 core system includes the PCI-424, the same enhanced PCI card
used by MOTU's 2408mk3 and 24I/O. The PCI-424 card adds a fourth Audio
Wire port that allows users to connect up to four MOTU audio interfaces
to the computer. At 12 channels each, a fully expanded HD192 system
provides 48 simultaneously active input and output connections at
sample rates up to 192 kHz (or as many channels as the host computer
supports at the 4x sample rates). HD192 users can connect any MOTU PCI
audio interface to their PCI-424 card, including the new 2408mk3 and
24I/O interfaces, as well as all legacy PCI-324 interfaces (the
original 2408, 2408mkII, 1296, 1224, 24i and 308). Legacy interfaces
can take full advantage of the PCI-424's new CueMix DSP near-zero
latency monitoring.
MOTU HD192 Converters
The most important link in the digital recording chain is the A/D
converter. It is the critical component that converts your analog input
signal into digital information. The higher the quality of the A/D
converter, the better your recordings will sound.
The 192-kHz converters in the HD192 are the very same used in more
expensive HD systems. With 120dB A-weighted dynamic range and a THD+N
of 0.0005%, the HD192 is simply the best sounding front end you can buy
for your digital audio workstation.
Front Panel Metering
The HD192's front panel provides dedicated 19-segment level meters for
all 12 inputs and outputs. Two over meters are included, a temporary
over meter and an over/hold meter that is resettable via software.
Comprehensive clock status LEDs are also included so you can see at a
glance the current sampling rate and clock source.
Useful in the unlikely event you wish to turn off your HD192, a front
panel power switch is provided. An interesting fact about MOTU Audio
interfaces is that they are hot swappable. This means you can power
off, plug-in, add and remove interfaces without turning your computer
off or restarting.
Features:
- Twelve channels of +4, balanced, 192-kHz 24-bit analog inputs and outputs using XLR jacks.
- AES/EBU digital I/O
- 19-segment LED meters on every input and output
- 16, 20, and 24-bit recording at 44.1, 48, 88.2, 96, 176.4 or 192kHz
- Word clock in and out
- Dedicated word clock input for AES/EBU I/O
- AudioWire connector for PCIe-424 audio card
- A-weighted dynamic range 120dB
- THD+N of 0.00056% (-106dB)
- R/CORE transformers for efficient, low-heat operation with virtually no magnetic interference or acoustic hum
