Home > Computer Audio > Audio Interfaces > Firewire >

MOTU 896mk3 Firewire/USB Hybrid Interface
MOTU 896mk3 Firewire/USB Hybrid Interface

Alternative Views:

MOTU 896mk3 Firewire/USB Hybrid Interface

28x30 FireWire/USB 24-bit/192kHz Audio Interface with 8-channels of XLR/TRS Analog Inputs with Microphone Preamps, AES/EBU, S/PDIF, ADAT, S/MUX, and Built-in DSP Mixing and Effects - Mac/PC
List Price: $1,295.00
Our Price: $995.00
Savings: $300.00
Found a Better Price? Let Us Know.

Availability: In Stock
Product Code: SKU178191

Description Specs

MOTU 896mk3 Firewire/USB Hybrid Interface

The MOTU 896mk3 Hybrid FireWire/USB audio interface enhances the already supremely accomplished 896mk3 with the addition of USB. With eight XLR/TRS "combo" style analog inputs with preamps, true hi-Z guitar inputs plus a load of digital I/O for a total of 28 inputs and 32 outputs, the 896mk3 Hybrid is ready to rock. Onboard effects juice the featureset with Classic Reverb, Brit-flavoured EQ, and an emulation of the legendary LA-2A, which does jaw-dropping things to drums and mix busses. If you need a top-notch interface, check out the MOTU 896mk3 Hybrid.

Digital mixing
The 896mk3 Hybrid provides 28 inputs and 32 outputs in a two rack-space form factor. All I/O is routed to an on-board 16-bus digital mixer driven by hardware-based DSP with 32-bit floating point precision. The mixer allows for no-latency effects processing to inputs, outputs, or busses directly in the 896mk3 hardware, independent of the computer. Effects can even be applied when the 896mk3 is operating stand-alone as a complete rack-mounted mixer. Input signals to the computer can be recorded wet, dry, or dry with a wet monitor mix (for musicians during recording, for example).

Control CueMix with your iPad
MOTU's CueMix FX software, the mixing software that drives the powerful routing of the 896mk3, can be controlled from your iPad. MOTU created CueMix templates for the TouchOSC controller app, giving you complete control over your 896mk3's mixing and effects processing over a Wi-Fi network. This means that when you're recording in your studio, you don't need to keep going back to your computer to adjust gain levels, change monitoring effects, or virtually anything else you rely on CueMix for.

The 896mk3 Hybrid is equipped with Direct Digital Synthesis (DDS), a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the 896mk3 is resolved to an external clock source via either word clock or SMPTE time code. The 896mk3 can directly resolve to (or generate) time code via a dedicated quarter-inch time code input and output, without the need for an extra synchronizer.

Comprehensive metering
The MOTU 896mk3 Hybrid features comprehensive front panel metering. For starters, 10-segment ladder LEDs are provided for every input and output. One 8-channel meter bank is dedicated to the eight analog inputs. Another 8-channel meter bank can display any input or output bank, which the user can quickly select with a convenient front-panel rotary encoder. Dedicated main out meters are also provided.

Hybrid FireWire / USB2 connectivity
As a hybrid audio interface, the 896mk3 provides flexible connectivity to any Mac or PC via FireWire or high-speed USB 2.0, with eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.

Flexible operation
The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

On-board digital mixer with effects for monitoring and live mixing
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.

MOTU FireWire audio interfaces can connect to any Firewire port. Just plug in and go, with any standard cable. The 896mk3 Hybrid provides two FireWire Type B ports, which provide the most reliable FireWire connection available. The ports operate at 400 Mbit/s, and they can be connected to any available FireWire port on your computer, either Type A or Type B. If your computer has FireWire Type B ports, use the included 9-pin-to-9-pin FireWire cable. If your computer has either standard Type A ports or miniature Type A ports, use the appropriate 9-pin-to-6-pin or 9-pin-to-4-pin FireWire cable (sold separately).

When recording from the analog inputs, the 896mk3’s signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.

Advanced audio analysis tools
Analyze and scope your audio with advanced diagnostic tools, including a full-screen real-time FFT display, spectrogram "waterfall" display, full-featured oscilloscope, X-Y plot, and linear/polar phase analysis graphs.

Stand-alone operation as a mixer
After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

Across-the-board compatibility
The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

  • 28-in/32-out FireWire interface with FireWire/USB 2.0 connectivity
  • CueMix FX - flexible 28 input/16 bus mixer with on-board DSP effects
  • Comprehensive front-panel control
  • Stand-alone operation
  • Eight rear panel combo jacks provide 1/4" or XLR mic input with phantom power and pad
  • Clip protection
  • Eight 24-bit/192kHz analog inputs and outputs on XLR jacks
  • 16 channels of ADAT lightpipe, 8 channels of SMUX (96kHz) or two pairs of stereo TOSLink
  • Expandable - add additional interfaces for more I/O as your needs grow
  • Separate XLR main outs and front-panel headphone jacks, each with independent volume control
  • Stereo 24-bit 96kHz AES/EBU in/out
  • Stereo 24-bit 96kHz S/PDIF in/out
  • Word clock in and out
  • Includes drivers for Mac & PC, including ASIO, WDM, Wave, GSIF, Core Audio, and Core MIDI
  • Supports all popular Macintosh and Windows audio software
  • 100% compatible with all host-based effects processing in today's popular audio programs
  • Includes AudioDesk full-featured workstation software for the Mac
  • Plug-and-play operation with your Mac or PC via FireWire
  • Front panel volume control for monitoring
  • Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available
  • Two front panel headphone jacks with independent volume controls
  • Comprehensive front panel metering for all analog and digital audio I/O
  • Dedicated front panel clock status LEDs
  • International 100-240V, 50-60Hz autoswitching power supply

Write a review »