At last there is a choice. Monitors which tell
you how good you sound, or monitors which 'make' you sound good. -
Listen to a pair of powered Fostex NX-6A monitors and you'll discover a
sound free of the 'enhancements' often found in other speakers. A
natural sound, transparent and without harshness even at high sound
pressure levels - and including those subtle low frequencies.
But don't take our word for it.
When choosing nearfield monitors for your
studio you really ought to evaluate as many different speakers as you
can before a decision is made. After all, how else are you going to
realise that your sound is best handled by a pair of Fostex NX-6As?
Harmonious Technology
We could tell you about unique enclosure design
which utilizes HP sound reflectors to prevent unwanted standing waves.
We could also mention the 6.5" LF unit which features Hyper Radial for
natural and smooth sound reproduction.
Maybe you would be impressed with the UDR
(Up/Down Roll) Tangential edge to the LF unit which negates unwanted
resonance and virtually eliminates hearing fatigue? Or perhaps the
extended 55Hz to 38kHz frequency range would make you sign on the
dotted line? Possibly, but we think not. No, it is only when listening
and comparing them side-by-side with other monitors that you can fully
appreciate the clarity and transparency of sound that a pair of Fostex
NX-6As offer.
Features:
- Low Frequency Unit
- 6.5" (160mm) with HR (Hyper Radial) diaphragm
which utilises the latest diaphragm 'Radial Papermaking Technology' for
natural and smooth sound reproduction
- UDR (Up/Down Roll) Tangential driver edge eliminates the unwanted resonance
- Wide-range 20mm hard dome tweeter
- Employs magnesium diaphragm which eliminates metallic characteristics and features ultra-fast high frequency response
- LF and HF units feature highly rigid cast aluminum frames minimizing unnecessary vibrations and resonances
- Magnetically shielded drivers allow for safe placement close to a video monitor
- Unique HP sound reflectors prevents the generation of standing waves in the enclosure
- Bi-amplifier
- Dedicated 60W (LF) + 40W (HF) bi-amplifier eliminates electric interference between the drivers
- Overall output level control
- Dedicated tweeter level control (±3dB) cut/boost
- LO EQ control : ±3d cut/boost around 55Hz for optimum performance in varying environments
Specifications
- Speaker Section
- Impedance 6 ohm (LF) / 8 ohm (HF)
- Speaker Units
- LF unit 160mm HR diaphragm woofer
- HF unit 20mm Magnesium Dome tweeter
- Frequency response 55Hz - 38kHz
- Maximum Sound Pressure Level 104dB/W (Max/rated input)
- Enclosure Type Bass reflex type with HP sound reflectors
- Amplifier Section
- Output
- LF 60W (typical)
- HF 60W (typical)
- Input - Balanced
- Connector XLR-3-31 type (Pin 2:HOT) x 1
- Impedance > 10k ohm
- Level +4dBu
- Input - Unbalanced
- Connector ø 6mm phone jack x 1
- Impedance > 10k ohm
- Level -10dBV
- Crossover Frequencies 6kHz / -18dB / Oct (LF) & 8kHz / -18dB / Oct(HF)
- Tweeter Level Control ±3dB variable
- Lo EQ control 55Hz, ±3dB variable
- Physical
- Dimensions: 230(W) x 350(H) x 334(D)mm
- Weight Approx.: 29 lbs, 13kg
- Power Requirements: 120V, 60Hz. 230V, 50/60Hz. 230V, 50Hz
- Power Consumption: 70W
