MATRIX-200 is the newest member
of the popular B-52 MATRIX family
of active systems. Compact, powerful
and portable the MATRIX-200 delivers
clean, accurate sound ideal for
both stage and music playback applications.
The MATRIX-200 has a true 200-watt
stereo amplifier, built in 5-channel
mixer, studio-quality digital effects,
phantom power and numerous patch
inputs / outputs.
BUILT-IN
DSP EFFECTS
• Eight
built-in high quality DSP effects
• • *
Level control to mix processed signal
• •
with main signal
• • *
INPUT/MASTER
switch to route effects
• • to either Master section or to
• • individual channels
• Powerful routing to combine optional
•outboard
effects with internal DSP effects |
24-BIT DIGITAL
EFFECTS
 The
MATRIX-200 includes a 24-bit, 8-position
digital effects loop, that allows you to
incorporate DSP controlled and digitally
generated effects into your mix. Effects
offer a wide range of "environments" to
choose from including:
•
Chorus
•
Chorus/reverb
•
Slapback
•
Echo
•
Large room
•
Small
room
•
Small
hall
•
Large
hall |
|
|
|
MATRIX-200 REAR
PANEL
Speaker
Outputs: Two full-range outputs of 100
watts each. The outputs are equalized to
optimize the acoustic output of the MATRIX-200
satellite speakers.
Subwoofer Output: Switchable
XLR balanced output allows you to add
a subwoofer to extend the low frequency
output. The sub switch must be in the
OFF position if a subwoofer is not used.
The switch ON position reduces the low
frequency output o
f
the full range stereo outputs.
Headphone: A 1/4” TRS phone
jack stereo output is included for
monitoring by headphone. |
XLR
INPUTS WITH PHANTOM POWER
The
XLR microphone inputs are designed for
use with
low-impedance |Z| microphones or equipment
that has a mic-level balanced output
(direct-out). The balanced mic inputs
include a 15 Volt DC phantom power source
allowing the use of condenser microphones.
Dynamic microphones can also be used
with these connectors as the 15 Volts
DC is too low to disturb their normal
operation. |
|
|
|
STEREO
POWER AMPLIFIER FEATURES
• Output
stage with discrete devices,
• not integrated IC amps
• Output power of 2 x 100w RMS with high headroom
• Comprehensive amplifier and speaker protection
• circuitry to guard against short circuits, DC offsets,
• over-heating, turn-on thumps, subsonic and
• supersonic frequencies.
• Built-in stereo clip limiter
• Equalization customized to enhance and optimize
• speaker system performance.
• Output for stereo headphones on rear panel
• Very efficient cooling, utilizing a large heatsink
• and two direct flow fans
• Power supply with low-noise torodial transformer
• and a dual voltage (115/230Vac) selector switch
LOUDSPEAKERS
• Dual 6.5" drivers
optimized for Di'Ippolito configuration
• (one speaker high, one low)
• 1” exit phenolic tweeter on exponential horn to match
• acoustic response of 6.5" drivers |
Speaker
cables and
suitcase to carry all three
components is included. |
|
|
FIVE
CHANNEL MIXER FEATURES |
• Four
channels with both balanced XLR mic
inputs
and unbalanced ¼” jack line
level inputs
• • *
15Vdc
phantom power on balanced XLR inputs
• •
*
for
condenser microphones
• • *
PAN,
TONE and EFFECT LEVEL controls on
• •
*
each
channel
• One stereo input channel
for stereo sources
• • *
Dual
input with ¼” TRS Jack and
3.5mm Jack
•
*
to
connect any 2-channel source
• • *
Dedicated
mono ¼” Jack INSTRUMENT
input
•
*
with
frequency response contoured for
•
*
acoustical
instruments
• • *
PAN/BALANCE,
TONE and EFFECT controls
|
• Low
distortion, low noise circuitry
• PLAYBACK input/output RCA connectors
with
LEVEL control
• PATCH section to connect optional
external processors,external effects, and
foot switch
• 3-band MASTER EQ section
• XLR subwoofer output and SUB switch
on rear
panel to connect a powered subwoofer |
|
|
COMPLETE
SYSTEM |
|
Dimensions:
20” (W)
x 32“ (H) x 15” (D)
Weight (lbs): 80 |
