The B-52 MATRIX-1000 V2 Speaker System includes
two 10" two-way powered satellites and a dedicated powered 15"
subwoofer. The MATRIX-1000 V2 has a built-in three-channel 700-watt
power amplifier, three distinct volume controls, electronic crossover
with equalization and VCA compressor.
The circuitry is
designed and fine-tuned to integrate all components for the best
possible sound. There is no need to tweak or finesse settings on a
crossover or compressor to make your system sound great. Simply roll
the system into place on its heavy duty casters, plug in the AC,
connect the two speaker cables, run two XLR cables to your mixer and
you're ready to go
Built-in 3-channel amplifier
The 15" subwoofer enclosure is divided into two separate compartments.
The front chamber serves as the cabinet for the 15" subwoofer. The rear
chamber houses all of the system's electronic circuitry, which includes
the amplification for all three components, power supply and preamps.
The 15" subwoofer has a power handling capability of 400 watts and a
nominal impedance of 8 ohms.
10" satellite speakers
The MATRIX-1000V2 satellites are loaded with a custom designed 10"
speaker and 1" titanium diaphragm compression driver. The horn" is a 90
x 60 elliptical waveguide that can be rotated 90° to optimize the
dispersion pattern to best suit your particular application. These
versatile speakers are pole-mountable and can sit as stage monitors.
They also include 3/8" 16 tpi flying hardware for small venue permanent
installations. The rounded front of the satellite speaker is a perfect
fit for the convex face of the subwoofer, allowing you to stack, roll
and transport the entire MATRIX-1000V2 in and out of a venue in record
time.
Transporting the system
To transport
the MATRIX-1000 V2, simply set the subwoofer on its casters and place
the satellite speakers on to the subwoofer's front panel, facing down.
Fasten the satellites with the included locking strap using the handles
on either side of the subwoofer cabinet. Place the included cover over
the entire system and you're ready to move the MATRIX-1000 V2 with ease.
Suggested applications:
Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate
Audio / Video * Home Entertainment System * Live Sound System * Stage
Monitoring System * Booth Monitoring System * Drum Monitoring
B-52 MATRIX-1000 V2 700W Active 3-Piece Speaker System Features:
- V2 upgrades:
- A high-performance compression driver for a
smoother frequency response and lower distortion throughout the upper
midrange frequencies
- A new elliptical wave guide with more uniform dispersion
- The
addition of a voltage controlled amplifier (VCA) on all three amplifier
channels to minimize the effects of amplifier clipping; lowers the
maximum distortion produced at VERY high drive levels and offers
additional protection for the speaker component
- FREE dust cover
- Improved B-52 handles
- 700-WATT 3-CHANNEL AMPLIFIER
- Subwoofer Power Output: 400 W
- 10" Two-way Power Output: 150 W
- Line in: XLR Female
- Parallel out: XLR Male
- Input Impedance: 48 k Ohms
- Speaker Out: Speakon NL4 Style Connector
- Power Requirement: 115V<>50/60Hz<>10A, 230V<>50/60Hz<>6A
15" SUBWOOFER
- Speaker: 15" Custom Built B-52 Subwoofer
- Nominal Impedance: 8 Ohms
- Subwoofer Freq. Response: 40 Hz; 120 Hz +/- 3dB
- Sound Pressure Level (1w/1m): 102 dB (half space)
- Max. SPL: 127 dB @1% THD
- Weight: 120 lbs
- Dimensions (Transport): 28" (H) x 19" (W) x 23" (D)
10" TWO-WAY SPEAKERs
- Speaker Input: Speakon style connector, (pin 1+ = +, pin 1- = -)
- LF/MF Woofer: 10" Custom Built B-52 Transducer
- HF Driver: 1" Titanium Diaphragm
- HF Dispersion: 90 x 60
- Nominal Impedance: 4 Ohms
- Active Freq. Response: 120 19K Hz +/- 3dB
- Crossover Frequency (passive): 2.5 kHz; 12 dB / Octave
- Sound Pressure Level (1w/1m): 101 dB (half space)
- Max. SPL: 124 dB @10% THD
- Weight: 30 lbs
- Dimensions (Upright): 19" (H) x 12" (W) x 11" (D)
COMPLETE SYSTEM
- Weight: 180 lbs
- Dimensions (Transport): 39" (H) x 19" (W) x 23" (D)
