Audix CX-212 Condenser Microphone :: Condenser Mics :: Vocal Microphones :: Microphones :: Hardware

The Audix CX-212 is an exceptional multi-pattern condenser microphone with a large diaphragm that is ideal for project studios, professional audio production, and live stage performances. Delivers a smooth, uniform frequency response from 30 Hz - 20 kHz. The Audix CX-212 microphone offers a choice of 3 polar patterns: cardioid, omni-directional, and figure 8. Additionally, the CX-212mic is equipped with a bass roll-off filter to help eliminate rumble and hum in lower frequencies. The Audix CX-212 handles sound pressure levels up to 132 dB. It's a perfect microphone for a wide variety of acoustic instruments, vocals, string sections, ensembles, and ambient room miking. The Audix CX-212 is designed with discreet low noise preamp circuitry, and operates on phantom power of 48-52 volts. Optimum results will be achieved by using the CX-212 mic with a high quality mic preamplifier and premium quality microphone cable.

Multi-pattern: Cardioid, Omni, Figure-8
1.07" gold vapor diaphragm Low noise electronics
Rich, warm tones ideal for digital recording Heavy duty isolation shock mount included

Applications:
Studio vocals, lead and backing Voice, over Choir Ambient room mic
Drum overheads, Orchestra Bells, chimes, marimba, vibes
Acoustic instruments (piano, sax, strings, guitar, flute)
Electric guitar cabs

Supplied Accessories:
Adjustable one-piece metal clip (MC-112)
Isolation shockmount (SMT-CX112)
Flight Case

Features:

Transducer Type: Condenser
Capsule Technology: 1.07"/27mm Gold Vapor Diaphragm
Frequency Range: 30 Hz - 20 kHz (+/- 3 dB)
Polar Pattern: Multi-Pattern
Output Impedance: 200 Ohms
Sensitivity O/C: 16.5 mV/ 26 mV (ref 1k @ 1 Pascal)
Noise Floor: 18 dB (A weighted)
Signal to Noise Ratio: 76 dB (ref 1k @ 1 Pascal)
Power Requirements: 48v +/- 4v phantom
Maximum SPL: 132 dB
Dynamic Range: 110 dB
Cable/Connector: 3-pin gold plated male XLR connector
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing: Copper alloy body
Finish: Black satin
Weight: 17 oz / 480g
Overall Length: 172 mm

Send to friend

Related products

#18895	Audix STAND-KD Heavy Duty Tripod Microphone Stand
#16458	Hosa MMK Pro microphone cable Neutrik connectors

Recommended

Customers who bought this product also bought the following products:

Customer feedback

Product rating

Voting

Reviews

Author: JB
I bought this mic blindly but came out very impressed. It has cardioid, figure 8, and omni! The sound is really clear and has a really really strong bottom end. The only negative thing I have to say is that the shockmount is a little old school and you have to be careful about kicking the bottom of the stand, but that's also just because it's a super sensitive mic. Great mic for picking up all the details!

Add your review here

Ratings and/or reviews are submitted by customers to our site based on their own personal experiences. The Midi Store LLC regularly checks these reviews for inappropriate language and may chose to delete or edit your review as required. However The Midi Store LLC does not screen reviews for accuracy and we do not endorse their content. Any abuse of the review system may result in The Midi Store LLC not allowing you to post. We believe this service is important to help you hear from others who have experience using the products that are of interest to you. When you submit a review you acknowledge that you, not The Midi Store LLC are responsible for it's content.