The MultiMix 4 USB is a four-channel desktop mixer with a USB digital
audio interface built in. This compact mixer is perfect for using in
basic computer-recording setups, video editing and production studios,
and portable podcasting setups because it outputs not only line-level
analog audio, but also stereo 16-bit, 44.1 kHz digital audio over USB
for low-noise, easy computer connection. You can also monitor back from
your computer through the same USB connection.
The MultiMix 4
USB mixer has four input channels, all of which can accept a 1/4" line
input. You can can plug XLR microphones into channels one and two,
including condensers thanks to the mixer's switchable 48V-phantom power
supply. You can also plug a guitar or bass directly into channel one's
switchable high-impedance input.
Channels one and two offer
switchable high-pass filtering at 75Hz to eliminate low-frequency
rumble, handling and wind noise. Each channel has an independent pan
control and channels one and two provide high and low-shelving EQs.
Channels one and two have independent gain trims, while channels three
and four are configured as a stereo pair at the level and pan controls.
The
MultiMix 4 USB has a two channel, five stage, multicolor LED meter for
visual monitoring the main output level. A stereo, 1/4" headphone
output has its own level control.
Features:
- 4-channel Desktop Mixer and 16-bit/44.1kHz USB audio interface
- 4 1/4" Line Inputs, 1 switchable to instrument level
- 2 XLR Inputs with selectable 48V phantom power
- Switchable highpass filter at 75Hz on channels one and two
- High- and low-shelving equalizer on channels one and two
- 2-channel 5-stage multicolor LED meter for 2 main 1/4" output levels
- 1/4" headphone output with independent level control
Specs:
INPUTS: Line (CH 1, 2): 10 KΩ input impedance
5.5 mV ~ 4.9 V RMS sensitivity for max output
Mic (CH 1, 2): 600 Ω input impedance balanced
700 mV RMS sensitivity for max output
Line (CH 3, 4): 700 mV RMS sensitivity for max output
HPF (CH 1, 2): 200 Hz (-1 dB), 80 Hz (-3 dB), 20 Hz (-24 dB)
OUTPUTS: Line: 7 V RMS max
Headphone: 0.5 W into 47 Ω
SIGNAL-TO-NOISE RATIO: Line: > 92 dB
(max output; JIS A-weighted) Mic: > 62 dB
DISTORTION: < 0.02%
FREQUENCY RESPONSE: Line: 20 Hz – 20 kHz (± 0.5 dB), Mic: 20 Hz – 15 kHz (± 0.5 dB)
CHANNEL EQUALIZER: Bass: ± 14 dB @ 80 Hz, Treble: ± 14 dB @ 12 kHz
CHANNEL FADER KILL: > 90 dB @ 1 kHz
CROSSTALK: > 85 dB @ 1 kHz
INTERFACE: USB1.1 or higher (stereo in and stereo out)
POWER ADAPTER: 10 V AC, 500 mA
Weight: 1.5lb
Dimensions: 7 3/4 L x 6 W x 2"H